HP M1132 MPF

[strublos]

Ahoj,
mám tuto tiskárnu a nemůžu tisknout. Našel jsem návod http://www.e-ott.info/2011/04/11/jak-nainstalovat-a-nastavit-skener-v-zarizenich-hewlett-packard-ovladac-hplip plugin nainstaloval.
Když dám tisk vše se tváří ok ale ve výsledku nic nevytiskne.
V adminu cups je u tiskové úlohy napsáno

Kód: [Vybrat]

stopped
"/usr/lib/cups/filter/hpcups failed"

Nevíte jak dál? Popřípadě potřebujete nějaké info? V HP Device Manager je tiskárna viditelná, u tiskové úlohy je dokonce napsáno

Kód: [Vybrat]

Print job has completed
Díky za rady

[Peťoš]

Verze MGA (32/64) a HPLIP. Co vypise dmesg pri zapnuti/pripojeni tiskarny?
Mam totez a zcela bez problemu.

[strublos]

MGA 1 32bit

hplip

Kód: [Vybrat]

rpm -qa | grep hplip
hplip-model-data-3.11.12-1pts1
hplip-3.11.12-1pts1
hplip-hpijs-3.11.12-1pts1
hplip-gui-3.11.12-1pts1
hplip-hpijs-ppds-3.11.12-1pts1
dmesg

Kód: [Vybrat]

usb 1-1: new high speed USB device using ehci_hcd and address 7
usb 1-1: New USB device found, idVendor=03f0, idProduct=042a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: HP LaserJet Professional M1132 MFP
usb 1-1: Manufacturer: Hewlett-Packard
usb 1-1: SerialNumber: 000000000QH4MKZ1SI1c
scsi5 : usb-storage 1-1:1.0
usb 1-1: USB disconnect, address 7
usb 1-1: new high speed USB device using ehci_hcd and address 8
usb 1-1: New USB device found, idVendor=03f0, idProduct=042a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: HP LaserJet Professional M1132 MFP
usb 1-1: Manufacturer: Hewlett-Packard
usb 1-1: SerialNumber: 000000000QH4MKZ1PR1a


[Peťoš]

Kód: [Vybrat]

hp-check -tNic nenapovi?

[strublos]

U tiskarny budu az v pondeli ale myslim ze nic kloudneho to nevratilo. Dam vedet.

[strublos]

Dmesg

Kód: [Vybrat]

usb 5-3: USB disconnect, address 2
usb 5-1: new high speed USB device using ehci_hcd and address 4
usb 5-1: New USB device found, idVendor=03f0, idProduct=042a
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: HP LaserJet Professional M1132 MFP
usb 5-1: Manufacturer: Hewlett-Packard
usb 5-1: SerialNumber: 000000000QH4MKZ1SI1c
scsi3 : usb-storage 5-1:1.0
scsi 3:0:0:0: CD-ROM            HP       Smart Install    1.0  PQ: 0 ANSI: 2
sr1: scsi3-mmc drive: 0x/0x caddy
sr 3:0:0:0: Attached scsi CD-ROM sr1
sr 3:0:0:0: Attached scsi generic sg2 type 5


hp-check -t

Kód: [Vybrat]

HP Linux Imaging and Printing System (ver. 3.11.12)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                   
2. Run-time check mode (-r or --run): Use this mode to determine if a distro   
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                     
3. Both compile- and run-time check mode (-b or --both) (Default): This mode   
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux localhost.localdomain 2.6.38.8-desktop586-10.mga #1 SMP Wed Jan 25 10:18:54 UTC 2012 i686 i686 i386 GNU/Linux

Distribution:
unknown 0.0

Checking Python version...
OK, version 2.7.1 installed

Checking PyQt 4.x version...
OK, version 4.8.3 installed.

Checking for CUPS...
Status: scheduler is not running
Version: /usr/bin/cups-config: řádek 59: test: příliš mnoho argumentů
1.4.6
warning: /etc/cups/cupsd.conf file not found or not accessible.

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.2


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.11.12 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.11.12

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.11.12
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1



Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 30.1.2012 09:04:02
version = 3.11.12

[last_used]
device_uri = "hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH4MKZ1SI1c"
printer_name = HP_LaserJet_Professional_M1132_MFP
working_dir = .

[settings]
systray_visible = 0
systray_messages = 0

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
lpstat
------
Type: Unknown
Device URI: Síť není dostupná


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
 
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x42a at 005:002:
    Device URI: hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH4MKZ1SI1c

HP Linux Imaging and Printing System (ver. 3.11.12)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

    Device node: /dev/bus/usb/005/002
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/005/002
# owner: root
# group: lp
user::rw-
user:strublos:rw-
group::rw-
mask::rw-
other::r--



---------------
| USER GROUPS |
---------------

strublos lp lpadmin

User member of group 'lp'. Enables print/ scan/ fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.

v cups adminu porad pise /usr/lib/cups/filter/hpcups failed

[strublos]

cat /var/log/cups/error_log

Kód: [Vybrat]

E [30/Jan/2012:08:55:46 +0100] [Job 2] Job stopped due to filter errors; please consult the error_log file for details.
D [30/Jan/2012:08:55:46 +0100] [Job 2] The following messages were recorded from 08:55:24 to 08:55:46
D [30/Jan/2012:08:55:46 +0100] [Job 2] Adding start banner page "none".
D [30/Jan/2012:08:55:46 +0100] [Job 2] Queued on "HP_LaserJet_Professional_M1132_MFP" by "strublos".
D [30/Jan/2012:08:55:46 +0100] [Job 2] Auto-typing file...
D [30/Jan/2012:08:55:46 +0100] [Job 2] Request file type is application/x-shell.
D [30/Jan/2012:08:55:46 +0100] [Job 2] File of type application/x-shell queued by "strublos".
D [30/Jan/2012:08:55:46 +0100] [Job 2] Adding end banner page "none".
D [30/Jan/2012:08:55:46 +0100] [Job 2] job-sheets=none,none
D [30/Jan/2012:08:55:46 +0100] [Job 2] argv[0]="HP_LaserJet_Professional_M1132_MFP"
D [30/Jan/2012:08:55:46 +0100] [Job 2] argv[1]="2"
D [30/Jan/2012:08:55:46 +0100] [Job 2] argv[2]="strublos"
D [30/Jan/2012:08:55:46 +0100] [Job 2] argv[3]="TV"
D [30/Jan/2012:08:55:46 +0100] [Job 2] argv[4]="1"
D [30/Jan/2012:08:55:46 +0100] [Job 2] argv[5]="finishings=3 number-up=1 page-set=all job-uuid=urn:uuid:329a7be8-e2f8-3199-67cb-8dd64f38cfab job-originating-host-name=localhost time-at-creation=1327910124 time-at-processing=1327910124 AP_D_InputSlot="
D [30/Jan/2012:08:55:46 +0100] [Job 2] argv[6]="/var/spool/cups/d00002-001"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[8]="HOME=/var/spool/cups/tmp"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[10]="SERVER_ADMIN=root@localhost.localdomain"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[11]="SOFTWARE=CUPS/1.4.6"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[13]="USER=root"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[16]="IPP_PORT=631"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[17]="CHARSET=utf-8"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[18]="LANG=cs_CZ.UTF-8"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[19]="PPD=/etc/cups/ppd/HP_LaserJet_Professional_M1132_MFP.ppd"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[20]="RIP_MAX_CACHE=8m"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[21]="CONTENT_TYPE=application/x-shell"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH4MKZ1SI1c"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[23]="PRINTER_INFO="
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[24]="PRINTER_LOCATION="
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[25]="PRINTER=HP_LaserJet_Professional_M1132_MFP"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[26]="CUPS_FILETYPE=document"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[27]="FINAL_CONTENT_TYPE=printer/HP_LaserJet_Professional_M1132_MFP"
D [30/Jan/2012:08:55:46 +0100] [Job 2] Started filter /usr/lib/cups/filter/texttops (PID 12168)
D [30/Jan/2012:08:55:46 +0100] [Job 2] Started filter /usr/lib/cups/filter/pstops (PID 12169)
D [30/Jan/2012:08:55:46 +0100] [Job 2] Started filter /usr/lib/cups/filter/gstoraster (PID 12170)
D [30/Jan/2012:08:55:46 +0100] [Job 2] Started filter /usr/lib/cups/filter/hpcups (PID 12171)
D [30/Jan/2012:08:55:46 +0100] [Job 2] Started backend /usr/lib/cups/backend/hp (PID 12172)
D [30/Jan/2012:08:55:46 +0100] [Job 2] Page = 595x842; 18,16 to 577,826
D [30/Jan/2012:08:55:46 +0100] [Job 2] STATE: -marker-supply-low-warning
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->num_fonts = 35
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[0] = AvantGarde-Book
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[1] = AvantGarde-BookOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[2] = AvantGarde-Demi
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[3] = AvantGarde-DemiOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[4] = Bookman-Demi
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[5] = Bookman-DemiItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[6] = Bookman-Light
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[7] = Bookman-LightItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[8] = Courier
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[9] = Courier-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[10] = Courier-BoldOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[11] = Courier-Oblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[12] = Helvetica
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[13] = Helvetica-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[14] = Helvetica-BoldOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[15] = Helvetica-Narrow
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[16] = Helvetica-Narrow-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[17] = Helvetica-Narrow-BoldOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[18] = Helvetica-Narrow-Oblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[19] = Helvetica-Oblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[20] = NewCenturySchlbk-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[21] = NewCenturySchlbk-BoldItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[22] = NewCenturySchlbk-Italic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[23] = NewCenturySchlbk-Roman
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[24] = Palatino-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[25] = Palatino-BoldItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[26] = Palatino-Italic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[27] = Palatino-Roman
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[28] = Symbol
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[29] = Times-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[30] = Times-BoldItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[31] = Times-Italic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[32] = Times-Roman
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[33] = ZapfChancery-MediumItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[34] = ZapfDingbats
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->num_fonts = 35
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[0] = AvantGarde-Book
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[1] = AvantGarde-BookOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[2] = AvantGarde-Demi
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[3] = AvantGarde-DemiOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[4] = Bookman-Demi
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[5] = Bookman-DemiItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[6] = Bookman-Light
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[7] = Bookman-LightItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[8] = Courier
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[9] = Courier-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[10] = Courier-BoldOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[11] = Courier-Oblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[12] = Helvetica
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[13] = Helvetica-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[14] = Helvetica-BoldOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[15] = Helvetica-Narrow
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[16] = Helvetica-Narrow-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[17] = Helvetica-Narrow-BoldOblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[18] = Helvetica-Narrow-Oblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[19] = Helvetica-Oblique
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[20] = NewCenturySchlbk-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[21] = NewCenturySchlbk-BoldItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[22] = NewCenturySchlbk-Italic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[23] = NewCenturySchlbk-Roman
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[24] = Palatino-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[25] = Palatino-BoldItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[26] = Palatino-Italic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[27] = Palatino-Roman
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[28] = Symbol
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[29] = Times-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[30] = Times-BoldItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[31] = Times-Italic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[32] = Times-Roman
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[33] = ZapfChancery-MediumItalic
D [30/Jan/2012:08:55:46 +0100] [Job 2] ppd->fonts[34] = ZapfDingbats
D [30/Jan/2012:08:55:46 +0100] [Job 2] Page = 595x842; 18,16 to 577,826
D [30/Jan/2012:08:55:46 +0100] [Job 2] slow_collate=0, slow_duplex=0, slow_order=0
D [30/Jan/2012:08:55:46 +0100] [Job 2] Before copy_comments - %!PS-Adobe-3.0
D [30/Jan/2012:08:55:46 +0100] [Job 2] %!PS-Adobe-3.0
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%BoundingBox: 0 0 595 842
D [30/Jan/2012:08:55:46 +0100] [Job 2] %cupsRotation: 0
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%Creator: texttops/CUPS v1.4.6
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%CreationDate: Po 30. leden 2012, 08:55:24 CET
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%Title: (TV)
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%For: (strublos)
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%Pages: (atend)
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%DocumentNeededResources: font Monospace-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%+ font Monospace
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%DocumentSuppliedResources: procset texttops 1.1 0
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%+ font Monospace-Bold
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%+ font Monospace
D [30/Jan/2012:08:55:46 +0100] [Job 2] %%EndComments
D [30/Jan/2012:08:55:46 +0100] [Job 2] Before copy_prolog - %%BeginProlog
D [30/Jan/2012:08:55:46 +0100] [Job 2] Before copy_setup - %%Page: 1 1
D [30/Jan/2012:08:55:46 +0100] [Job 2] Before page loop - %%Page: 1 1
D [30/Jan/2012:08:55:46 +0100] [Job 2] Copying page 1...
D [30/Jan/2012:08:55:46 +0100] [Job 2] pagew = 559.4, pagel = 810.7
D [30/Jan/2012:08:55:46 +0100] [Job 2] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 841
D [30/Jan/2012:08:55:46 +0100] [Job 2] PageLeft = 18.0, PageRight = 577.4
D [30/Jan/2012:08:55:46 +0100] [Job 2] PageTop = 826.2, PageBottom = 15.5
D [30/Jan/2012:08:55:46 +0100] [Job 2] PageWidth = 595.4, PageLength = 841.7
D [30/Jan/2012:08:55:46 +0100] [Job 2] Wrote 1 pages...
D [30/Jan/2012:08:55:46 +0100] [Job 2] PPD uses qualifier 'Gray.Plain.'
D [30/Jan/2012:08:55:46 +0100] [Job 2] Calling FindDeviceById(HP_LaserJet_Professional_M1132_MFP)
D [30/Jan/2012:08:55:46 +0100] [Job 2] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [30/Jan/2012:08:55:46 +0100] [Job 2] Failed to get profile filename!
D [30/Jan/2012:08:55:46 +0100] [Job 2] no profiles specified in PPD
D [30/Jan/2012:08:55:46 +0100] [Job 2] Ghostscript command line: /usr/bin/gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOMEDIAATTRS -sDEVICE=cups -sstdout=%stderr -sOutputFile=%stdout -I/usr/share/cups/fonts -c -f -_
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[8]="HOME=/var/spool/cups/tmp"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[10]="SERVER_ADMIN=root@localhost.localdomain"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[11]="SOFTWARE=CUPS/1.4.6"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[13]="USER=root"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[16]="IPP_PORT=631"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[17]="CHARSET=utf-8"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[18]="LANG=cs_CZ.UTF-8"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[19]="PPD=/etc/cups/ppd/HP_LaserJet_Professional_M1132_MFP.ppd"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[20]="RIP_MAX_CACHE=8m"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[21]="CONTENT_TYPE=application/x-shell"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH4MKZ1SI1c"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[23]="PRINTER_INFO="
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[24]="PRINTER_LOCATION="
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[25]="PRINTER=HP_LaserJet_Professional_M1132_MFP"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[26]="CUPS_FILETYPE=document"
D [30/Jan/2012:08:55:46 +0100] [Job 2] envp[27]="FINAL_CONTENT_TYPE=printer/HP_LaserJet_Professional_M1132_MFP"
D [30/Jan/2012:08:55:46 +0100] [Job 2] Start rendering...
D [30/Jan/2012:08:55:46 +0100] [Job 2] Processing page 1...
D [30/Jan/2012:08:55:46 +0100] [Job 2] STATE: +connecting-to-device
D [30/Jan/2012:08:55:46 +0100] [Job 2] PAGE: 1 1
D [30/Jan/2012:08:55:46 +0100] [Job 2] STATE: -connecting-to-device
D [30/Jan/2012:08:55:46 +0100] [Job 2] STATE: -media-empty-error,media-jam-error,hplip.plugin-error,cover-open-error,toner-empty-error,other
D [30/Jan/2012:08:55:46 +0100] [Job 2] Processing page 2...
D [30/Jan/2012:08:55:46 +0100] [Job 2] Rendering completed
D [30/Jan/2012:08:55:46 +0100] [Job 2] prnt/backend/hp.c 371: read new pjl status: 10023
D [30/Jan/2012:08:55:46 +0100] [Job 2] prnt/backend/hp.c 371: read new pjl status: 10023
D [30/Jan/2012:08:55:46 +0100] [Job 2] prnt/backend/hp.c 371: read new pjl status: 10023
D [30/Jan/2012:08:55:46 +0100] [Job 2] prnt/backend/hp.c 373: read pjl job_end: 0
D [30/Jan/2012:08:55:46 +0100] [Job 2] prnt/backend/hp.c 371: read new pjl status: 10001
D [30/Jan/2012:08:55:46 +0100] [Job 2] ready to print
D [30/Jan/2012:08:55:46 +0100] [Job 2] End of messages
D [30/Jan/2012:08:55:46 +0100] [Job 2] printer-state=3(idle)
D [30/Jan/2012:08:55:46 +0100] [Job 2] printer-state-message="ready to print"
D [30/Jan/2012:08:55:46 +0100] [Job 2] printer-state-reasons=none
E [30/Jan/2012:08:58:59 +0100] [Job 1] Stopping unresponsive job!
E [30/Jan/2012:09:00:49 +0100] [Job 2] Stopping unresponsive job!
E [30/Jan/2012:09:04:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [30/Jan/2012:09:07:50 +0100] PID 6944 (/usr/lib/cups/filter/hpcups) crashed on signal 11!


[Rellik]

Myslím, že je nějaká chyba v některé aktualizaci. Já si taky nedávno koupil kvůli linuxu tiskárnu od HP s tím, že má dobrou podporu. Zvolil sem zároveň i reinstal systému a tiskárna fungovala parádně do doby, než se začaly stahovat aktualizace systému. Od té doby se se mnou tiskárna nebaví. A to jsem zkoušel kde co...  http://forum.mageia.cz/index.php?topic=105.0 :-( Nejspíš to zase přeinstalím jak bude čas a vykašlu se na aktualizace...

[paur]

V Mandrivě jsem kdysi měl také problém s tiskem na HP (DeskJet 845-C) - vyjížděl téměř čistý papír pouze s několika nesmyslnými znaky.Přitom dříve tiskárna tiskla a problém nastal od nějakého nevystopovatelného okamžiku. Dlouho jsem s tiskárnou laboroval a nakonec se mi jej podařilo odtranit změnou ovladače. V Ovládacím centru jsem vybral typ tiskárny a vyzkoušel jiný ovladač... a od té doby šlape. Primitivní, ale účinné a vyzkoušení nic nepokazí...

[strublos]

Porad nic

[Yullaw]

V Mandrivě jsem kdysi měl také problém s tiskem na HP (DeskJet 845-C) - vyjížděl téměř čistý papír pouze s několika nesmyslnými znaky.Přitom dříve tiskárna tiskla a problém nastal od nějakého nevystopovatelného okamžiku. Dlouho jsem s tiskárnou laboroval a nakonec se mi jej podařilo odtranit změnou ovladače. V Ovládacím centru jsem vybral typ tiskárny a vyzkoušel jiný ovladač... a od té doby šlape. Primitivní, ale účinné a vyzkoušení nic nepokazí...

potvrzuji, mel jsem (asi rok nazpet) stejny problem u HP 840C... stejnym postupem, zmenou ovladace, byl problem vyresen. Nyni u novejsich verzi OS (Mandriva do 2010.2, Mageia 1) vse funguje bez jineho zasahu.

[Peťoš]

Ja s tim nemel problemy. Ale dost pry pomaha odebrat tiskarnu kompletne ze systemu a pak nakonfigurovat pres MCC>tiskarna.

[strublos]

Kompletne myslis co? i ty hp-* srandy? Nebo z cups, tiskaren a tak?

[Rellik]

Kompletne myslis co? i ty hp-* srandy? Nebo z cups, tiskaren a tak?

Taky by mě zajímalo jak na kompletní deinstalaci tiskárny ze systému. Evidentně odebrání ze správce HP a CUPSu nestačí (v mcc zmizí sama)...

[Peťoš]

Na spravu tiskaren (co se tyce pridat/odebrat) pouzivam vyhradne, jen a pouze MCC. Ne Webove rozhrani CUPS, ani spravce hp. Zkus tu tiskarnu odebrat a pridat jen pomoci tohoto.