Doinstalováno, ale stejně to nejde:Měl by jsi nainstalovat python3-qt5 a ne python-qt5Kód: [Vybrat][root@localhost rellik]# intel-power-controlPodotýkám že balíček s Qt5 je nainstalovaný (ten jsem doinstaloval po té co mi to poprvé vypsalo tuto hlášku. dokonce jsem udělal i restart PC):
Traceback (most recent call last):
File "/usr/local/bin/intel-power-control", line 5, in <module>
from PyQt5.Qt import *
ImportError: No module named 'PyQt5'Kód: [Vybrat][root@localhost rellik]# urpmi PyQt5
Balíček python-qt5-5.1.1-1.1.mga4.x86_64 je již nainstalován
[root@localhost rellik]# intel-power-control
Traceback (most recent call last):
File "/usr/local/bin/intel-power-control", line 5, in <module>
from PyQt5.Qt import *
ImportError: No module named 'PyQt5'
Podotýkám že balíček s Qt5 je nainstalovaný (ten jsem doinstaloval po té co mi to poprvé vypsalo tuto hlášku. dokonce jsem udělal i restart PC):[root@localhost rellik]# urpmi PyQt5
Balíček python-qt5-5.1.1-1.1.mga4.x86_64 je již nainstalován
[rellik@localhost ~]$ intel-power-control
Traceback (most recent call last):
File "/usr/local/bin/intel-power-control", line 3, in <module>
import argparse, os, re, sip, subprocess, sys
ImportError: No module named 'sip'
Nee:Kód: [Vybrat][root@localhost rellik]# intel_gpu_top
bash: intel_gpu_top: příkaz nenalezen
[root@localhost yullaw]# intel-power-control
Traceback (most recent call last):
File "/usr/local/bin/intel-power-control", line 645, in <module>
main()
File "/usr/local/bin/intel-power-control", line 641, in main
i = IntelPowerControl()
File "/usr/local/bin/intel-power-control", line 44, in __init__
self.updateAll()
File "/usr/local/bin/intel-power-control", line 373, in updateAll
self.updateValues()
File "/usr/local/bin/intel-power-control", line 462, in updateValues
os.path.join(self.gpubasepath,k,'gt_cur_freq_mhz')))),
ValueError: invalid literal for int() with base 10: ''
[root@localhost yullaw]# [root@localhost rellik]# yes | sensors-detect
# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)
# System: Gigabyte Technology Co., Ltd. B85-HD3
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found unknown chip with ID 0x8620
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-i801' for device 0000:00:1f.3: Intel Lynx Point (PCH)
Module i2c-dev loaded successfully.
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively):
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): Unloading i2c-dev... OK
Unloading cpuid... OK
[root@localhost rellik]# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +33.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +31.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +27.0°C (high = +80.0°C, crit = +100.0°C)
samotný graf procesoru během přehrávání videa - 
# urpmi lm_sensors# yes | sensors-detectpříkaz znamená, aby nalezl všechna čidla/snímače zařízení (PC/notebooku) a automaticky potvrdil "yes" na otázky, zda chceš provést detekci určité části hardwaru.$ sensorsa vypiš také sem. # intel_gpu_top...Toto je pro grafické karty nVidia, ne pro tvůj Intel (vidím to v tvém podpisu).
Ještě jsem pak našel tohle: http://cuda-z.sourceforge.net/ ale asi to chce přímo i nějaké ovladače grafiky CUDA... a to opravdu nehodlám riskovat něco pokazit...
