HP Photosmart 5510 - Devide comunications eror 5012

Hardware > Tiskárny a skenery

(1/4) > >>

Rellik:
Zdravím,
tak sem opět zde. Pro změnu s novou tiskárnou HP Photosmart 5510. Už při jejím zprovoznění sem měl trochu problémy, protože tiskárna chtěla nejnovější HPLIP. Po jeho nainstalování fungovala v pohodě (tiskárna i skener). Bohžel teď asi po dvou týdnech její nečinosti, sem chtěl něco naskenovat a tiskárna se opět se mnou nebaví (ani skener). Po zapnutí sice nahlásí, že je připojena, ale XSANE hlásí "Otevření zařízení selhalo... Chyba během V/V zařízení". Správe zařízení HP hlásí "Device comunication eror (5012)" :( Za těch 14 dní proběhly asi 3 aktualizace systému. A tak myslím, že se něco pokazilo "díky" tomu.
Zkoušel sem cups přes http://localhost:631 , přes Nastavení HP a i přes ovládací centrum.
Poradí někdo jak to zase zprovoznit? Díky.

Peťoš:
Co ti vypise prikaz

--- Kód: ---hp-check -t
--- Konec kódu ---

starsi:
Tiež mám ten pocit, že niektoré aktualizácie mi rozhasili funkčný systém. :(

Rellik:

--- Citace: Peťoš Leden 07, 2012, 21:46:24 ---Co ti vypise prikaz

--- Kód: ---hp-check -t
--- Konec kódu ---

--- Konce citace ---
Vypíše:

--- Kód: --- [rellik@localhost ~]$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.11.12)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine
if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built
HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux localhost 2.6.38.8-desktop-9.mga #1 SMP Tue Dec 20 09:45:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

Distribution:
unknown 0.0

Checking Python version...
OK, version 2.7.1 installed

Checking PyQt 4.x version...
OK, version 4.8.3 installed.

Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
warning: /etc/cups/cupsd.conf file not found or not accessible.

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.2

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.11.12 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.11.12

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.11.12
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/usb/Photosmart_5510_series?serial=CN18T046VK05NR"
printer_name = Photosmart_5510
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 10
enable = true
type = 2

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =

[installation]
date_time = 8.1.2012 08:19:33
version = 3.11.12

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

Device URI Model
---------------------------------------------------- ---------------------------
hp:/usb/Photosmart_5510_series?serial=CN18T046VK05NR HP Photosmart 5510 series

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Photosmart_5510
---------------
Type: Printer
Device URI: hp:/usb/Photosmart_5510_series?serial=CN18T046VK05NR
PPD: /etc/cups/ppd/Photosmart_5510.ppd
PPD Description: HP Photosmart 5510 Series, hpcups 3.11.12
Printer status: printer Photosmart_5510 is idle. enabled since Ne 8. leden 2012, 08:18:22 CET

HP Linux Imaging and Printing System (ver. 3.11.12)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/lib64/python2.7/site-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
set_interactive(1)
error: Unable to communicate with device (code=12): hp:/usb/Photosmart_5510_series?serial=CN18T046VK05NR
error: Device not found
error: Communication status: Failed

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/Photosmart_5510_series?serial=CN18T046VK05NR' is a Hewlett-Packard Photosmart_5510_series all-in-one

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0xa111 at 001:005:
Device URI: hp:/usb/Photosmart_5510_series?serial=CN18T046VK05NR
Device node: /dev/bus/usb/001/005
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/005
# owner: root
# group: lp
user::rw-
user:lp:rw-
user:rellik:rw-
group::rw-
mask::rw-
other::r--

---------------
| USER GROUPS |
---------------

rellik

error: User needs to be member of group 'lp' to enable print, scan & fax.
error: User needs to be member of group 'lpadmin' to manage printers.

-----------
| SUMMARY |
-----------

error: 13 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

--- Konec kódu ---
A když spustím správce zařízení HP tak v konzoli to vypíše toto:

--- Kód: --- HP Linux Imaging and Printing System (ver. 3.11.12)
HP Device Manager ver. 15.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: Unable to communicate with device (code=12): hp:/usb/Photosmart_5510_series?serial=CN18T046VK05NR
error: Device not found

--- Konec kódu ---

Peťoš:

--- Citace: Rellik Leden 08, 2012, 08:23:41 ---
--- Kód: ------------------
| USER GROUPS |
---------------

rellik

error: User needs to be member of group 'lp' to enable print, scan & fax.
error: User needs to be member of group 'lpadmin' to manage printers.

--- Konec kódu ---

--- Konce citace ---

pridej se do obou skupin. A pokud to nepomuze, zkus:

--- Kód: ---chmod 666 /dev/bus/usb/001/005
--- Konec kódu ---
(samozrejme jako root)

Navigace

[0] Seznam témat

[#] Další strana

Odpověď

Přejít na plnou verzi